Skip to main content Scroll Top

CHANNEL VALVE

Our products comply with the requirements of our customers and the current Croatian standards HRN EN 124: 2005. We have a large selection of cast iron products, especially ductile iron.
The features of this channel fitting are:

  • Ductile iron is 10 – 50% lighter than gray iron for the same load capacity
  • Stable in the bearing under load, and no noise
  • The frames are shaped well to fit the installation location.
  • Covers and grilles can be secured against accidental opening with screws, locks and wedge-shaped self-closing teeth.

They are widely used from pavements, sidewalks, parking lots to tunnels and bridges. They can be personalized by adding inscriptions, logos or coats of arms according to the wishes of customers or users. The frame and cover, or grille, are made of ductile iron of EN-GJS-400 quality. Anti-corrosion protection is provided by dipping in black bitumen paint or by plastic coating. All these coatings are harmless to drinking water.

EV AND EVO VALVE

Flanges according to EN 1092-2 standard

Control: manual, electric drive, extended spindle 

CHECK VALVES WITH GATE OR BALL

Application: water, drinking water, waste water

FILTH CATCHERS

Dirt traps are used to trap dirt in pipelines to prevent damage to fittings such as reducing valves, gate valves, etc.

ABOVE-GROUND and UNDERGROUND HYDRANTS

Types of above-ground hydrants: Cast iron, BAROK type, stainless steel hydrants (fixed and breakable type)

AIR VENTILATION VALVES

The suction-vent valve ensures the proper operation of the pipeline by allowing air to escape during operating conditions, and air to enter and exit when filling and emptying the pipeline.

BUTTERFLY CLOSERS

Butterfly valves are manufactured from ductile iron or steel construction (welded version), depending on the function and size (DN). The nominal dimensions of the butterfly valves we offer range from DN 100 to DN 4000.

REGULATION VALVES

Control valves are executive and key elements in the control circuit that must ensure good and stable operation of the process.

KNIFE LOCKS

Knife gate valves are intended for opening/closing in systems with thick, viscous, corrosive and abrasive substances.

OTHER FITTINGS

Application: water, drinking water, waste water
Necklaces with or without valve